Icom IC-SAT100M Operating Manual - Page 23
Specification
View all Icom IC-SAT100M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
6 SPECIFICATIONS AND OPTIONS Installing the AH-40 6. Attach the antenna unit cover. Y Type Screw NOTE: When the AH-40 cable is inserted into the antenna cover, or the antenna unit cover is removed, the antenna unit does not meet IP67 requirements for waterproof protection. DDSpecification ••Frequency range: 1616 ~ 1626.5 MHz ••Antenna impedance: 50 Ω nominal ••Operating temperature range: -40˚C ~ +85˚C, -40˚F ~ +185˚F ••VSWR: 2.0:1 (At resonance point) ••Dimensions*: 36 (d) × 52.3 (H) mm, (1.4 (d) × 2.1 (H) inches) ••Weight (approximate): 55 g, 0.12 lb ••Connector: SMA LLAll stated specifications are subject to change without notice or obligation. 20
SPECIFICATIONS AND OPTIONS
20
6
Installing the AH-40
D
Specification
• Frequency range:
1616 ~ 1626.5 MHz
• Antenna impedance:
50 Ω nominal
• Operating temperature range:
–40˚C ~ +85˚C, –40˚F ~ +185˚F
• VSWR:
2.0:1 (At resonance point)
•
Dimensions*:
36 (d) × 52.3 (H) mm,
(1.4 (d) × 2.1 (H) inches)
• Weight (approximate):
55 g, 0.12 lb
• Connector:
SMA
L
All stated specifications are subject to change without notice or obligation.
6.
Attach the antenna unit cover.
Y Type
Screw
NOTE:
When the AH-40 cable is inserted into the antenna
cover, or the antenna unit cover is removed, the
antenna unit does not meet IP67 requirements for
waterproof protection.