Icom IC-SAT100M Operating Manual - Page 22
Installing the AH-40
View all Icom IC-SAT100M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
6 SPECIFICATIONS AND OPTIONS Installing the AH-40 The AH-40 can be connected instead of the antenna element attached to the RF unit. LLSee also Installing the antenna (p. 12) to connect the AH-40. NOTE: ••Move away from buildings and install the transceiver in areas with an open sky. ••When you remove the antenna unit cover, the antenna unit loses its waterproof protection. ••The AH-40 includes a strong magnet. 1. Remove the antenna unit cover. 3. Detach the metal plate, and then push the cover to remove. Metal plate Push Cover 4. Insert the AH-40 cable into the antenna cover. Y Type Screw 2. Remove the antenna element. 2 Antenna element 1 Coaxial cable 5. Attach the AH-40 to the RF Unit. 2 1 RF Unit 19
SPECIFICATIONS AND OPTIONS
19
6
Installing the AH-40
The AH-40 can be connected instead of the antenna
element attached to the RF unit.
L
See also Installing the antenna (p. 12) to connect
the AH-40.
NOTE:
• Move away from buildings and install the transceiver
in areas with an open sky.
• When you remove the antenna unit cover, the
antenna unit loses its waterproof protection.
• The AH-40 includes a strong magnet.
1.
Remove the antenna unit cover.
2. Remove the antenna element.
3.
Detach the metal plate, and then push the cover
to remove.
4.
Insert the AH-40 cable into the antenna cover.
5.
Attach the AH-40 to the RF Unit.
Antenna element
1
2
Y Type
Screw
Metal plate
Cover
Push
1
2
RF Unit
Coaxial cable