Icom IC-SAT100M Operating Manual - Page 8

Using the Last Call Play function

Get Icom IC-SAT100M PDF manuals and user guides View all Icom IC-SAT100M manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

3 OTHER FUNCTIONS Using the Surveillance function When this function is turned ON, the beep is not heard and the backlight and the Status indicator do not light, even when a signal is received, or a key is pushed. 1. Assign the function to the [P1] key in the Menu screen. [OK] > Functions > Key Setup > P1 Key 2. H old down [BACK] for 1 second to exit the Menu screen. 3. Push [Surveillan] to turn the function ON or OFF. LL" " is displayed while the function is ON. Using the AquaQuake function The AquaQuake water draining function removes water from the speaker grill by vibrating the internal speaker. 1. Assign the function to the [P1] key in the Menu screen. [OK] > Functions > Key Setup > P1 Key 2. H old down [BACK] for 1 second to exit the Menu screen. 3. Hold down [AquaQu...] to use the function. LLWater in the speaker grill may muffle the sound coming from the speaker. LLAfter the specified period of time, the function automatically stops, even if you continue holding down the key. LLThe function works with only the internal speaker. Using the Last Call Play function The transceiver can playback the previously received call. LLYou can playback up to 6 latest calls. LLConfirm the Call Recorder function is turned ON. [OK] > PTT Options > Call Recorder 1. Assign the function to the [P1] key in the Menu screen. [OK] > Functions > Key Setup > P1 Key 2. H old down [BACK] for 1 second to exit the Menu screen. 3. Push [Last Call] to playback the received call. LLPush [Last Call] to change the previously received call. Using the RX Speaker function The transceiver can output received call audio to an external device through the D-Sub 25-pin (22 pin: EXAFO). NOTE: To use this function, connect an external audio amplifier (user supplied). zzHold down the [S2] key to turn the RX Speaker function ON or OFF. ••" " is displayed when the function is ON. LLWhen the transceiver is turned OFF, this function is also turned OFF. Using the Public Address function The Public Address function can output the audio from the supplied transceiver microphone to an external device through the D-Sub 25-pin (22 pin: EXAFO). NOTE: To use this function, connect an external audio amplifier (user supplied). zzPush [S3] key to turn the Public Address function ON or OFF. ••Enters the Public Address function. LLPush DIRECTIONAL KEY to change the volume. LLWhen the transceiver turns OFF or received a message, this function also turns OFF. Public Address 50 Last Call Scan 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
OTHER FUNCTIONS
5
3
Using the Surveillance function
When this function is turned ON, the beep is not heard
and the backlight and the Status indicator do not light,
even when a signal is received, or a key is pushed.
1.
Assign the function to the [P1] key in the Menu
screen.
[OK] > Functions > Key Setup >
P1 Key
2.
Hold down [BACK] for 1 second to exit the Menu
screen.
3.
Push [Surveillan] to turn the function ON or OFF.
L
“
” is displayed while the function is ON.
Using the AquaQuake function
The AquaQuake water draining function removes
water from the speaker grill by vibrating the internal
speaker.
1.
Assign the function to the [P1] key in the Menu
screen.
[OK] > Functions > Key Setup >
P1 Key
2.
Hold down [BACK] for 1 second to exit the Menu
screen.
3.
Hold down [AquaQu...] to use the function.
L
Water in the speaker grill may muffle the sound
coming from the speaker.
L
After the specified period of time, the function
automatically stops, even if you continue holding
down the key.
L
The function works with only the internal speaker.
Using the Last Call Play function
The transceiver can playback the previously received
call.
L
You can playback up to 6 latest calls.
L
Confirm the Call Recorder function is turned ON.
[OK] > PTT Options > Call Recorder
1.
Assign the function to the [P1] key in the Menu
screen.
[OK] > Functions > Key Setup >
P1 Key
2.
Hold down [BACK] for 1 second to exit the Menu
screen.
3.
Push [Last Call] to playback the received call.
L
Push [Last Call] to change the previously received
call.
Using the RX Speaker function
The transceiver can output received call audio to an
external device through the D-Sub 25-pin
(22 pin: EXAFO).
NOTE:
To use this function, connect an external
audio amplifier (user supplied).
z
Hold down the [S2] key to turn the RX Speaker
function ON or OFF.
•“
” is displayed when the function is ON.
L
When the transceiver is turned OFF, this function is
also turned OFF.
Using the Public Address function
The Public Address function can output the audio from
the supplied transceiver microphone to an external
device through the D-Sub 25-pin (22 pin: EXAFO).
NOTE:
To use this function, connect an external
audio amplifier (user supplied).
z
Push [S3] key to turn the Public Address function
ON or OFF.
• Enters the Public Address function.
L
Push DIRECTIONAL KEY to change the volume.
L
When the transceiver turns OFF or received a
message, this function also turns OFF.
Last Call
Scan
Public Address
50