Insignia NS-32L430A11 User Manual (English) - Page 17

Insignia 32" LCD TV 720p Connecting power Notes • • • Your TV only works on 120 V, 60 Hz power. Your TV should only be operated from the power source indicated on the label. Always unplug the AC power cord from the AC power outlet when you will not be using your TV for an extended period of time. To connect power: • Connect the power cord to the AC IN connector on the back of your TV, then plug the cord into an AC power outlet. Connecting a cable or satellite TV box Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best connection type available. Connection type HDMI Component Composite Coaxial Video quality Best Better than composite or coaxial Better than coaxial Good To connect a cable or satellite TV box: 1 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable box. Use one of the following connection types to connect the cable or satellite TV box: • HDMI (best) • Component video: (better than composite video) • Composite video (better than coaxial) HDMI Component video Connecting an antenna or cable TV without a cable box To connect an antenna or cable TV without a cable box: • Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the back of your TV and to the antenna or cable TV wall jack. Composite video Notes • • • Use a 75 ohm cable to eliminate interference and noise from radio waves. Do not bundle the 75 ohm cable with the power cord or other cables. If the antenna is not installed correctly, contact qualified service personnel to correct the problem. 2 Depending on the jacks available on the cable or satellite TV box, connect a video cable from the outgoing jacks on the cable or satellite TV box to the corresponding jacks on the back of your TV. The connection can be to an HDMI jack, the COMPONENT IN/Y, PB, PR jacks, or the AV IN VIDEO (composite) jack. www.insigniaproducts.com 13