Intel BOXD955XCSLKR Product Specification - Page 11
Manufacturing Options
UPC - 735858173834
View all Intel BOXD955XCSLKR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Product Description Table 1. Feature Summary (continued) Hardware Monitor Subsystem • Hardware monitoring and fan control ASIC • Voltage sense to detect out of range power supply voltages • Thermal sense to detect out of range thermal values • Three fan connectors • Three fan sense inputs used to monitor fan activity • Fan speed control 1.1.2 Manufacturing Options Table 2 describes the manufacturing options. Not every manufacturing option is available in all marketing channels. Please contact your Intel representative to determine which manufacturing options are available to you. Table 2. Manufacturing Options ATAPI CD-ROM connector A 1 x 4-pin ATAPI-style connector for connecting an internal ATAPI CD-ROM drive to the audio mixer Audio Subsystem Intel High Definition Audio subsystem in one of the following configurations: • 8-channel (7.1) audio subsystem with five analog audio outputs and two S/PDIF digital audio outputs (coaxial and optical) using the Sigmatel* 9223 audio codec • 6-channel (5.1) audio subsystem with three analog audio outputs using the Sigmatel 9220 audio codec Auxiliary PCI Express Power Connector Provides required additional power when using high power (75 W or greater) add-in cards in both the PCI Express x16 and the Secondary PCI Express x16/x4 bus add-in card connectors Auxiliary Power (AUX PWR) Connector Provides power for internal chassis lighting Discrete SATA RAID controller • Silicon Image Sil 3114 SATA RAID controller • Four SATA connectors (in addition to the four SATA connectors on the ICH7-R SATA interface) IEEE-1394a/b Interface IEEE-1394a/b controller and three IEEE-1394a/b connectors: one back panel connector, two front-panel connectors. Back panel connector is IEEE-1394acompatible only; front panel connectors are 1394a- or 1394b-compatible, configurable through the BIOS Setup program. Processor power connector One of the following connectors for providing +12 V power to the processor voltage regulator: • 2 x 4-pin (requires a power supply with a dual-rail 2 x 4 power cable) • 2 x 2-pin Trusted Platform Module (TPM) A component that enhances platform security For information about Available configurations for the board Refer to Section 1.2, page 15 11