Intel BOXD955XCSLKR Product Specification - Page 79
Overview of BIOS Features
UPC - 735858173834
View all Intel BOXD955XCSLKR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
3 Overview of BIOS Features What This Chapter Contains 3.1 Introduction ...79 3.2 Resource Configuration 80 3.3 System Management BIOS (SMBIOS 81 3.4 Legacy USB Support...81 3.5 BIOS Updates ...82 3.6 Boot Options ...83 3.7 Fast Booting Systems with Intel® Rapid BIOS Boot 84 3.8 BIOS Security Features 85 3.1 Introduction The BIOS is stored in either a Firmware Hub (FWH) or a Serial Peripheral Interface (SPI) Flash device and can be updated using a disk-based program. The FWH or the SPI contains the BIOS Setup program, POST, the PCI auto-configuration utility, and Plug and Play support. The BIOS displays a message during POST identifying the type of BIOS and a revision code. The initial production BIOSs are identified as BK95510J.86A. When the BIOS Setup configuration jumper is set to configure mode and the computer is poweredup, the BIOS compares the CPU version and the microcode version in the BIOS and reports if the two match. The BIOS Setup program can be used to view and change the BIOS settings for the computer. The BIOS Setup program is accessed by pressing the key after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins. The menu bar is shown below. Maintenance Main Advanced Security Power Boot Exit NOTE The maintenance menu is displayed only when the board is in configure mode. Section 2.8 on page 65 shows how to put the board in configure mode. 79