Intel BOXD955XCSLKR Product Specification - Page 65
Jumper Block
UPC - 735858173834
View all Intel BOXD955XCSLKR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Technical Reference 2.8 Jumper Block CAUTION Do not move the jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 23 shows the location of the jumper block. The 3-pin jumper block determines the BIOS Setup program's mode. Table 33 describes the jumper settings for the three modes: normal, configure, and recovery. When the jumper is set to configure mode and the computer is poweredup, the BIOS compares the processor version and the microcode version in the BIOS and reports if the two match. 1 3 J3F3 Figure 23. Location of the Jumper Block OM18047 Table 33. BIOS Setup Configuration Jumper Settings Function/Mode Jumper Setting Configuration Normal 1-2 1 The BIOS uses current configuration information and passwords for booting. Configure Recovery 3 2-3 1 3 None 1 3 After the POST runs, Setup runs automatically. The maintenance menu is displayed. The BIOS attempts to recover the BIOS configuration. A recovery diskette is required. 65