Intel D925XECV2 Product Specification - Page 13
Manufacturing Options
View all Intel D925XECV2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Product Description Table 2. Feature Summary (continued) LAN Support Gigabit (10/100/1000 Mbits/sec) LAN subsystem using the Marvell* Yukon* 88E8050 PCI Express Gigabit Ethernet Controller Expansion Capabilities • D925XECV2: Four PCI Conventional bus add-in card connectors (SMBus routed to PCI Conventional bus connector 2), two PCI Express x1 bus add-in card connectors, and one PCI Express x16 bus add-in card connector • D925XEBC2: Two PCI Conventional bus add-in card connectors (SMBus routed to PCI Conventional bus connector 2), one PCI Express x1 bus add-in card connector, and one PCI Express x16 bus add-in card connector Hardware Monitor Subsystem • Hardware monitoring and fan control ASIC • Voltage sense to detect out of range power supply voltages • Thermal sense to detect out of range thermal values • Three fan connectors • Three fan sense inputs used to monitor fan activity • Fan speed control 1.3.2 Manufacturing Options Table 3 describes the manufacturing options on the Desktop Boards D925XECV2 and D925XEBC2. Not every manufacturing option is available in all marketing channels. Please contact your Intel representative to determine which manufacturing options are available to you. Table 3. Manufacturing Options Audio Subsystem Alternate (ALT) Power Input Connector Intel High Definition Audio subsystem in one of the following configurations: • 8-channel (7.1) audio subsystem with five analog audio outputs and two S/PDIF digital audio outputs (coaxial and optical) using the Realtek ALC880 audio codec • 6-channel (5.1) audio subsystem with three analog audio outputs using the Realtek ALC860 audio codec Provides required additional power when using a power supply with a 20-pin (2x10) main power connector. Not required when using a power supply with a 24-pin (2x12) main power connector. ATAPI CD-ROM connector A 1 x 4-pin ATAPI-style connector for connecting an internal ATAPI CD-ROM drive to the audio mixer Auxiliary (AUX) Power Output Connector Provides power for internal chassis lighting (D925XECV2 board only) IEEE-1394a Interface SCSI Hard Drive Activity LED Connector IEEE-1394a controller and three IEEE-1394a connectors (one back panel connector, two front-panel connectors) Allows add-in hard drive controllers (SCSI or other) to use the same LED as the onboard IDE controller. (D925XECV2 board only) Trusted Platform Module (TPM) A component that enhances platform security (D925XECV2 board only) For information about Refer to Available configurations for the Desktop Boards D925XECV2 and D925XEBC2 Section 1.4, page 19 13