Intel S3420GPLX User Guide - Page 30
SAS RAID Support, IT/IR RAID Mode, Embedded Server RAID Technology II is enabled with the SAS Module - server motherboard
UPC - 735858211802
View all Intel S3420GPLX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Figure 5. Intel® SAS Entry RAID Module SAS RAID Support The BIOS Setup Utility provides drive configuration options on the Advanced | Mass Storage Controller Configuration setup page for the Intel® SAS Entry RAID Module AXX4SASMOD, some of which affect the ability to configure RAID. The Intel® SAS Entry RAID Module option is enabled by default once the Intel® SAS Entry RAID Module AXX4SASMOD is present. When enabled, you can set the Configure Intel® SAS Entry RAID Module to either LSI* Integrated RAID or Intel® ESRTII mode. IT/IR RAID Mode Supports entry hardware RAID 0, RAID 1, and RAID10/10E and native SAS pass through mode. When Intel® Embedded Server RAID Technology II is enabled with the SAS Module AXX4SASMOD, enclosure management is provided through the SAS_SGPIO or SES connector on the SAS Module AXX4SASMOD when a cable is attached between this connector and the backplane or I2C interface. Note: For help with navigating the BIOS Setup utility, refer to the Intel® Server Board S3420GP Technical Product Specification. For information on how to configure RAID, see the RAID software user's guide at: http://www.intel.com/support/motherboards/server/S3420GP/howto.htm For information about configure IT/IR RAID, see the IT/IR RAID software user's guide at: http://www.intel.com/support/motherboards/server/S3420GP/howto.htm 28 Intel® Server Board S3420GP User Guide