Intel S3420GPLX User Guide - Page 86
Bootable CD-ROM Disk Is Not Detected, LED Information, Table 10. LED Information
UPC - 735858211802
View all Intel S3420GPLX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
• If using ATA drives, verify the master/slave settings are set correctly. Refer to your drive documentation for details on setting the master/slave settings. • If using a RAID configuration with SCSI or SATA drives, make sure the RAID card is installed correctly. Bootable CD-ROM Disk Is Not Detected Check the following: • Make sure the BIOS is configured to allow the CD-ROM to be the first bootable device. LED Information The Intel® Server Board S3420GP includes LEDs that can aid in troubleshooting your system. The following table lists these LEDs and provides a description of their use. Table 10. LED Information LED Name ID System Fault Disk Activity POST Code 1-8 5-V Standby Power LED Function Aid in server identification from the back panel Visible fault warning Front panel Display boot 80 POST code Identify 5-V standby power on state Identify the power state of the system Location LED Color Notes Front panel and board rear left corner Front panel and board rear left corner Blue Green or Amber Press ID LED button or use Server Management software to turn the LED on and off. • On = No Fault • Green Blink = degraded • Amber = non-critical Front panel and board left side Green Blinking = Activity. No action required. Left rear of board Each LED can be Off, Green, Amber, or Red See the POST code table. Front left board Front panel Amber Green On = 5-V standby power on • Off = Power is off (off or S5) • On = Power on or S0) • Slow Blink = Low power state (S1 - S3) 84 Intel® Server Board S3420GP User Guide