Intel SBT2 Product Guide - Page 10

Processor, Memory, BX80526KB866256, BX80526KB8001M. - motherboard memory

Get Intel SBT2 - SS3LE DUAL SLOT2 UPTO 4GB EATX PDF manuals and user guides
UPC - 735858140096
View all Intel SBT2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

Processor  NOTE The SBT2 server board only supports processors with the following product codes: BX80526KB866256, BX80526KB1000256, BX80526KB8001M. Future processors may be supported. See the SBT2 support website for more information. Each Pentium III Xeon processor is packaged in a cartridge containing the processor core with an integrated 16 KB primary (L1) cache, a secondary (L2) cache, and a cover. A passive heat sink is attached to the back cover of the cartridge. The cartridge is secured to the system board by a retention module and electrically connected to the board through a Slot 2 connector. The processor external interface operates at a maximum of 133 MHz. The second-level cache is on the substrate of the processor cartridge. Memory The system board contains four 168-pin DIMM sockets. Memory is partitioned as four banks of registered SDRAM DIMMs (PC133 compatible), each providing 72 bits of noninterleaved memory (64-bit main memory plus ECC). Memory should be added in order from slot 1 to slot 4. The controller automatically detects, sizes, and initializes the memory array, depending on the type, size, and speed of the installed DIMMs, and reports memory size and allocation to the server via configuration registers.  NOTE Use DIMMs that have been tested for compatibility with the server board. Contact your sales representative or dealer for a current list of approved memory modules. Check the Intel Customer Support website for the latest tested memory list: http://support.intel.com/support/motherboards/server/SBT2/compat.htm 10 Description

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
10
Description
Processor
NOTE
The SBT2 server board only supports processors with the following product
codes:
BX80526KB866256, BX80526KB1000256, BX80526KB8001M.
Future processors may be supported.
See the SBT2 support website for more
information.
Each Pentium
III
Xeon processor is packaged in a cartridge containing the processor core with an
integrated 16 KB primary (L1) cache, a secondary (L2) cache, and a cover.
A passive heat sink is
attached to the back cover of the cartridge.
The cartridge is secured to the system board by a
retention module and electrically connected to the board through a Slot 2 connector.
The processor external interface operates at a maximum of 133 MHz.
The second-level cache is on
the substrate of the processor cartridge.
Memory
The system board contains four 168-pin DIMM sockets.
Memory is partitioned as four banks of
registered SDRAM DIMMs (PC133 compatible), each providing 72 bits of noninterleaved memory
(64-bit main memory plus ECC).
Memory should be added in order from slot 1 to slot 4.
The controller automatically detects, sizes, and initializes the memory array, depending on the type,
size, and speed of the installed DIMMs, and reports memory size and allocation to the server via
configuration registers.
NOTE
Use DIMMs that have been tested for compatibility with the server board.
Contact your sales representative or dealer for a current list of approved
memory modules.
Check the Intel Customer Support website for the latest
tested memory list: