Intel SBT2 Product Guide - Page 41

Security Menu You can make the following selections on the Security Menu itself. Enabling the Supervisor Password field requires a password for entering Setup. The passwords are not case-sensitive. Feature Supervisor Password is User Password is Set Supervisor Password Set User Password Password on Boot Secure Mode Diskette Access Power Switch Mask Option ROM Menu Mask Processor serial number Choices Clear Set Clear Set Press Enter Press Enter Disabled Enabled Everyone Supervisor Unmasked Masked Unmasked Masked Disabled Enabled Description Status only; user cannot modify. Status only; user cannot modify. Once set, this can be disabled by setting it to a null string, or by clearing password jumper on server board. When the key is pressed, you are prompted for a password; press ESC key to abort. Once set, this can be cleared by setting it to a null string, or by clearing password jumper on server board (see Server Board Jumpers in Chapter 5). When the key is pressed, you are prompted for a password; press ESC key to abort. Once set, this can be cleared by setting it to a null string, or by clearing password jumper on server board (see Server Board Jumpers in Chapter 5). Requires password entry before boot. System will remain in secure mode until password is entered. Password on Boot takes precedence over Secure Mode Boot. Enters Submenu. This is only available if both the user and supervisor passwords are set. Limits the use of the diskette drive to system supervisors. Supervisor password must be set to enable this feature. If set to Masked, you cannot turn off the power using the power switch after rebooting the OS. If set to masked, you cannot enter the Adaptec BIOS configuration by pressing CNTL A. Enables the processor serial number feature. Secure Mode Submenu Feature Secure Mode Timer Secure Mode Hot Key Ctrl-Alt-[ ] Secure Mode Boot Floppy Write Protect Choices Disabled 1 min 2 min 5 min 10 min 20 min 1 hr 2 hr Disabled Enabled [ ] [0-9, A, B, ..., Z] Disabled Enabled Disabled Enabled Description Period of keyboard/PS/2 mouse inactivity specified for secure mode to activate. A password is required for secure mode to function. Cannot be enabled unless at least one password is enabled. Enables Quicklock feature Cannot be enabled unless at least one password is enabled. Key assigned to start the Quicklock feature. System will boot in secure mode. You must enter a password to unlock the system. Cannot be enabled unless at least one password is enabled. When secure mode is activated, the diskette drive is write protected. You must enter a password to disable. Cannot be enabled unless at least one password is enabled. SBT2 Server Board Product Guide 41