JVC GY-HD250U 117 page operator's manual for the GY-HD250U - Page 41

e_hd250.book Page 37 Tuesday, October 24, 2006 3:11 PM Battery Operation The attachable battery varies depending on location. Recommended batteries U model: Dionic 90 (Anton Bauer) E model: Endura-7 (IDX) CAUTION Use only the recommended batteries. If a heavy battery is used, the battery may fall out depending on the way the HD camera recorder is used. „GY-HD250U Use an Anton Bauer battery. „GY-HD251E Use an IDX (Endura) battery. Attaching the Battery 1. Face the battery terminals down and align the battery V- mount with the battery adapter V-mount attachment. V-mount attachment V-mount Attaching the Battery 1. Align the battery guide pins (three places) with the bat- tery adapter guide holes and insert straight. Battery will not be properly attached if guide pins are not straight. Cassette cover side panel Release lever Guide Guide pins holes (×3) 2. Slide the battery down until it clicks and locks. • The battery is attached. Removing the Battery Slide the battery up while holding down the lock release button to remove the battery. Release button Battery Battery pack (trim pack) LCD screen side panel 2. Slide the battery towards the Cassette cover side panel until it clicks. • The battery is attached. Removing the Battery Slide the battery towards you (LCD screen side panel) while holding down the release lever, and pull away from the device to remove the battery. Release lever Battery 37