JVC GY-HD250U 117 page operator's manual for the GY-HD250U - Page 65

e_hd250.book Page 61 Tuesday, October 24, 2006 3:11 PM How to set the HEADER REC menu screen 1. Display the HEADER REC menu screen. 1Select the TC/UB/CLOCK.. item on the TOP MENU screen. 2Select the HEADER REC item on the TC/UB/CLOCK menu screen. TC/UB/CLOCK menu screen specified duration only, the Record-Standby mode is engaged automatically. • During HEADER REC recording, "HEADER REC" is shown (blinking) on the LCD monitor and in the viewfinder. HEADER REC menu screen 2. Setting the HEADER REC menu screen. 1Select the menu item. Rotate the SHUTTER dial to align the cursor (K) with the item to be set, and then press the SHUTTER dial. • The setting area of the selected item starts blinking. 2Changing the setting value. Rotate the SHUTTER dial to change the setting, and then press the SHUTTER dial. Cursor Item Set value „ In the case of the TC DATA item and the UB DATA item, the blinking digit position moves when the SHUTTER dial is pressed. When the SHUTTER dial is rotated, the value of the blinking digit changes. After all the digits have been set and the SHUTTER dial is pressed, EXECUTE starts blinking. Press the SHUTTER dial once more to confirm the set value. 3. To terminate the setting, press the STATUS button. Executing the HEADER REC Function The START KEY item on the HEADER REC menu screen should be set to STOP+REC. 1. Load the cassette and engage the Record-Standby mode or the Stop mode. 2. While pressing the STOP button, press the REC/VTR trigger button. • The tape automatically rewinds to the beginning, and HEADER REC operation starts from the beginning of the tape. After HEADER REC recording is performed for the During HEADER REC • The menu screen is not displayed during HEADER REC recording. 3. After HEADER REC recording is completed and the Record-Standby mode is engaged, normal recording starts when you press the REC/VTR trigger button. • When the TC GENE. switch is set to either REC or REGEN, the time code value at the start of the HEADER REC menu screen. MEMO • To stop during HEADER REC operation, press the REC/ VTR trigger button or the STOP button. • The HEADER REC menu screen cannot be opened dur- ing HEADER REC recording. • HEADER REC operation is accepted even during load- ing of the cassette tape. • The test tone (1 kHz sine-wave) recorded in the color bar section will be recorded unrelated to the setting for the TEST TONE item on the AUDIO/MIC[1/2] menu screen. • The time code preset on the TC/UB/CLOCK menu screen becomes invalid when HEADER REC recording is performed. • The user's bits following completion of HEADER REC recording will be the user's bits value set on the TC/UB/ CLOCK menu screen. • The running of the time code following completion of HEADER REC recording will be in accordance with the setting of the TC GENE. switch. FREE RUN : Continuous running. REC RUN or REGEN: Runs only during REC. • Camera images are not output to the LCD monitor, view- finder or video output during REW mode when the HEADER REC operation begins. 61