JVC GZ-MS100U Instructions - Page 14
Necessary Settings before Use, Charging the Battery Pack, Date/Time Setting - power cord
UPC - 683728187361
View all JVC GZ-MS100U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Necessary Settings before Use Charging the Battery Pack 1 Close the LCD monitor to turn off the camcorder. 2 Attach the b��a�t�te��r�y��p�a�c��k�. Slide the battery pack down until it locks in place. Bottom of the Camcorder BATT. NOTES • You can also use the camcorder with just the AC adapter. • Please do not pull or bend the AC adapter plug and cable. This may damage the AC adapter. Date/Time Setting 1 Open the LCD monitor to turn on the camcorder. 2 When [SET DATE/TIME!] appears, select [YES] within 10 seconds. 3 Connect the AC adapter. DC Jack Charge lamp If you do not select within 10 seconds, the screen disappears. In such case, press the power button ( ) and turn the camcorder on again. 3 Set the date and time. AC Adapter To AC Outlet (110V to 240V) • The charge lamp blinks to indicate charging has started. • When the lamp goes out, charging is finished. Unplug the AC adapter (or the power cord) from the AC outlet and disconnect the AC adapter from the camcorder. L To detach the battery pack Slide and hold BATT. (Z step 2), then remove the battery pack. L To check the remaining battery power See page 15. Repeat this step to input the month, day, year, hour and minute. 4 Touch the OK button to finish. L To change the date and time 1) Touch the MENU button. 2) Select [BASIC SETTINGS], and then [CLOCK ADJUST]. 3) Set the date and time. L To return to the previous screen Select @. L To quit the screen Touch the MENU button. 14