JVC HR-XVS44U Supplementary Material - Page 15

S-VIDEO Connection Antenna or Cable Coaxial cable Flat feeder Matching transformer (not supplied) AC outlet S VIDEO OUTPUT AC power cord AUDIO OUTPUT Back of unit S-Video cable (supplied) Audio cable (not supplied) VHF/UHF IN VHF/UHF OUT RF cable (supplied) EN 15 8 To connect to a TV with S-VIDEO/AUDIO input connectors . . . A Connect the unit to TV. A Connect the antenna, unit and TV as per "RF Connection". (੬ pg. 14) B Connect an optional audio cable between the AUDIO OUTPUT connectors on the rear panel of the unit and the TV's audio input connectors. C Connect the unit's S VIDEO OUTPUT connector to the TV's S-VIDEO input connector. B Connect the unit to power source. Plug the end of the AC power cord into an AC outlet. This unit performs Plug & Play Set automatically. (੬ pg. 17) ● The clock and tuner channels will automatically be set when the antenna is connected and when the AC power cord is first connected to an AC outlet. (If "AUTO" and the channel indicator are displayed on the front display panel before the unit is powered on, the clock and tuner channels are being set automatically. Wait for the time to be displayed on the front display panel before turning on the unit.) C Set the VCR channel to off. A Press POWER (1) to turn off the unit, then press STOP (8) on the unit for more than 5 seconds. "3 CH" appears on the front display panel. B Press CH +/- on the Remote to select "- CH" (off), then press OK. NOTES: ● You can obtain high-quality S-VHS pictures. ● If your TV is not stereo-capable, use the unit's AUDIO OUTPUT (DVD/VCR) connectors to connect to an audio amplifier for Hi-Fi stereo sound reproduction. ● To operate the unit with your TV using the S-VIDEO connection, set your TV to its AV mode. You can also use the TV/VCR button on the unit's Remote to set your TV to the AV mode. (੬ pg. 73) ● For switching the TV's mode, refer to the instruction manual of your television. To S-VIDEO input connector To 75 ohm Terminal TV