JVC HR-XVS44U Supplementary Material - Page 69
Edit To Or From, Another Video, Recorder
View all JVC HR-XVS44U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Edit To Or From Another Video Recorder A TV receiver Player Your unit S-Video cable AV mode Audio/video cable Audio/video cable B Your unit Another recorder Recorder Recorder TV receiver S-Video cable Audio/video cable Another recorder Player AV mode Audio/video cable Advantages of S-VHS video recorders You can edit from VHS to S-VHS, S-VHS to VHS, or, from S-VHS to S-VHS. ● From VHS to S-VHS: Record VHS playback signals in the S-VHS mode. Although the picture quality is inherently limited by that of the original, the edited tape has better picture quality than those made by VHS-to-VHS editing. ● From S-VHS to VHS: Because the picture quality of the source material is very high, the edited tape has better picture quality than those made by VHS-to-VHS editing. ● From S-VHS to S-VHS: All signals will be transferred with minimum degradation. EN 69 You can use your unit as the source player or as the recording deck. Slide the TV/VCR/DVD switch to the right. A Make connections. A When using your unit as the source player ... ... connect its AUDIO/VIDEO OUTPUT connectors to the audio/video input connectors on another recorder. B When using your unit as the recording deck ... ... connect its AUDIO/VIDEO INPUT connectors to the audio/video output connectors on another recorder. ● If connecting a unit with an S-VIDEO input/output connector, it is recommended to use the supplied S-Video cable to minimize picture degradation while editing. B Select the VCR deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. C Set the input mode of recording deck. With this video unit, press AUX (number key "0") and/or CH to select "L-1". ● When using S VIDEO connector, set "REAR AUX INPUT" to "S-VIDEO". (੬ pg. 79) ● When using VIDEO connector, set "REAR AUX INPUT" to "VIDEO". (੬ pg. 79) ● When using another recorder as the recording deck, refer to its instruction manual. D Set the edit mode. See "PICTURE CONTROL" on page 76. E Engage the Record Pause mode of the recording deck. Locate the point where you start recording, then engage the Record Pause mode. F Start the source player. Engage the Play mode of the source player. G Start the recording deck. Engage the Record mode of the recording deck. NOTES: ● All necessary cables can be obtained from your dealer. ● When you select "EDIT" to dub tapes in step D, be sure to select "AUTO" (or "NORM" when "VIDEO CALIBRATION" is set to "OFF") after you finish dubbing the tapes. ● When you use this unit as the source player for editing, be sure to set "SUPERIMPOSE" to "OFF" before starting. (੬ pg. 77)