JVC HR-XVS44U Supplementary Material - Page 70

70 EN Dubbing (from DVD to VCR) ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch to the right. EDITING (VCR DECK) (cont.) You can dub selected scenes from the DVD disc to a cassette, starting and stopping wherever you wish. However, it is not possible to dub the copy-protected disc. In such case, "ERROR" appears on the front display panel. A Load a cassette and place a disc. For the VCR deck Insert a cassette with the record safety tab intact. For the DVD deck A Press OPEN/CLOSE (x) on the DVD deck to open the disc tray. B Place the disc in the disc tray. C Press OPEN/CLOSE (x) on the DVD deck to close the disc tray. B Prepare the VCR deck for dubbing. A Press VCR. B Press SP/EP to select recording speed. C Search for the point where you want to start dubbing by pressing PLAY (4), FF (5) or REW (3) then press STOP (8). C Prepare the DVD deck for dubbing. A Press DVD. B Search for the point where you want to start dubbing by pressing PLAY (4), FF (5) or REW (3). C Press PAUSE (9) to pause playback a little before the start point. D Start dubbing. Press and hold REC (7), then press PLAY (4) on the Remote. ● "DUB" lights on the front display panel. E End dubbing. Press STOP (8). ● Be sure to press STOP (8) while the VCR indicator lights up on the unit. ● If you press STOP (8) or EJECT (x) with the DVD deck selected, the dubbing stopped, but the opening screen is also recorded. NOTES: ● You cannot start dubbing when the scan mode is set to the progressive mode. Set it to the interlace mode. (੬ pg. 84) ● Set "ON SCREEN GUIDE" to "OFF" (੬ pg. 83) if you do not want to record the on-screen display for DVD discs during dubbing. ● There may be a discrepancy of several seconds between where you intend editing to start, and where it actually starts. ● The superimposed indication during the operation or dubbing is not recorded. ● Set "PICTURE CONTROL" to "EDIT". (੬ pg. 76)