JVC HR-XVS44U Supplementary Material - Page 31

Next Function Memory The Next Function Memory "tells" the unit what to do after rewinding. Before continuing, make sure the unit is in the Stop mode. a- For Automatic Start Of Playback Press REW (3), then press PLAY (4) within 2 seconds. b- For Automatic Power Off Press REW (3), then press POWER (1) within 2 seconds. c- For Automatic Timer Standby Press REW (3), then press TIMER within 2 seconds. d- For Automatic Cassette Ejection After Tape Rewind Press REW (3), then press EJECT (x) within 2 seconds. Repeat Playback Your unit can automatically play back the whole tape 100 times repeatedly. 1 Start playback. Press PLAY (4). 2 Activate Repeat Playback. Press PLAY (4) and hold for over 5 seconds, then release. ● The Play indicator ($) on the front display panel blinks slowly. ● After playing back a tape 100 times, the unit stops automatically. 3 Stop Repeat Playback. Press STOP (8) at any time. ● Pressing PLAY (4), REW (3), FF (5) or PAUSE (9) also stops Repeat Playback. EN 31 Manual Tracking Your unit is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the CH buttons. 1 Override automatic tracking. During playback, press SP/EP on the Remote. 2 Adjust the tracking manually. Press CH + or - on the Remote. ● Press SP/EP again to return to automatic tracking. NOTE: When a new tape is inserted, the unit enters the automatic tracking mode automatically. Soundtrack Selection Your unit is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select. During Playback Pressing A.MONITOR changes the soundtrack as follows: ● You can also select the soundtrack on the Function Set screen. (੬ pg. 75) TRACK USE On-Screen Display H I-F I Hi-Fi sound is played back H I-F I L Sound on the left Hi-Fi channel is played back H I-F I R Sound on the right Hi-Fi channel is played back NORM Sound on the normal track is played back NORM H I-F I Both sounds on the Hi-Fi track and normal track are mixed and played back NOTES: ● "HIFI" should normally be selected. In this mode, Hi-Fi stereo tapes are played back in stereo, and the normal audio track is played back automatically for tapes with only normal audio. ● "SUPERIMPOSE" must be set to "ON" or the on-screen displays will not appear. (੬ pg. 77)