JVC HR-XVS44U Supplementary Material - Page 83
Others Settings
View all JVC HR-XVS44U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
EN 83 Playback discs DVD VIDEO with 48 kHz, 16/20/24 bit linear PCM DVD VIDEO with DTS DVD VIDEO with Dolby Digital Audio CD/Video CD Audio CD with DTS MP3/WMA disc STREAM/PCM Output DOLBY DIGITAL/PCM PCM ONLY 48 kHz, 16 bit linear PCM DTS bitstream 44.1 kHz, 16 bit stereo linear PCM Dolby Digital bitstream 48 kHz, 16 bit stereo linear PCM 44.1 kHz, 16 bit stereo linear PCM DTS bitstream 44.1 kHz, 16 bit stereo linear PCM Linear PCM NOTES: ● The unit is not equipped with the DTS decoding function. ● When you play back a DVD VIDEO or Audio CD disc with DTS, use a DTS decoder to get correct signals from your speakers. Never use the unit's analog output connectors, which output incorrect signals that may damage your speakers. ● If you connect the analog outputs and digital outputs simultaneously, be sure to select the source of the amplifier correctly, or set the level control of the amplifier connected to the analog outputs to minimum. Others Settings * The default setting is bold in the table below. 8 RESUME ON OFF DISC RESUME 8 ON SCREEN GUIDE ON OFF When this function is set to "ON", you can use the resume function. (੬ pg. 45) ON: You can start playback from the resume point of the placed disc. OFF: You cannot use the resume function. DISC RESUME: The unit retains a memory of the resume points of the last 30 discs played back, even though they have been ejected. NOTE: This function is not available for Audio CDs and MP3/WMA discs. When this function is set to "ON", the unit can display "on-screen guide" icons or characters which shows the conditions of the unit or disc.