JVC HR-XVS44U Supplementary Material - Page 47

VFP function - Adjusting the picture quality The VFP (Video Fine Processor) function enables you to adjust the picture character according to the type of programing, picture tone or personal preference. NOTE: Before you start operation; The VFP setting screen disappears if no operations are done for more than about 10 seconds. If the setting screen disappears before you finish, start from step 1 again. 1 Access the VFP setting menu. Press DVD PICTURE during playback. ● The current setting appears on the TV screen. NORMAL GAMMA +0 BRIGHTNESS +0 CONTRAST +0 SATURATION +0 TINT +0 SHARPNESS +3 Y DELAY +0 2 Select the VFP mode. Press w e repeatedly. ● Each time you press w e, the VFP mode changes as follows: NORMAL]CINEMA]USER 1]USER 2](Back to the beginning) NORMAL: CINEMA: USER 1/ USER 2: Select this normally. Suitable for movie. You can adjust parameters that affect picture appearance and store settings. Go to step 3. NOTE: You cannot adjust the parameters of "NORMAL" and "CINEMA". To adjust picture appearance manually 3 Access USER menu. Press w e repeatedly to select "USER 1" or "USER 2". USER 1 GAMMA +0 BRIGHTNESS +0 CONTRAST +0 SATURATION +0 TINT +0 SHARPNESS +3 Y DELAY +0 EN 47 4 Select the parameter. Press rt repeatedly to select a parameter you want to adjust, then press OK. ● Adjust gradually and confirm picture appearance results are as preferred. GAMMA (-4 to +4): Controls brightness of neutral tints while maintaining brightness of dark and bright portions. BRIGHTNESS Controls screen brightness. (-16 to +16): CONTRAST Controls screen contrast. (-16 to +16): SATURATION Controls screen color depth. (-16 to +16): TINT Controls screen tint. (-16 to +16): SHARPNESS Controls screen sharpness. (+0 to +3): Y DELAY (-2 to +2): Controls screen color gap. ● VFP menu disappears and the following pop-up window appears on the TV screen. GAMMA +0 GAMMA +0 5 Adjust the parameter. Press rt repeatedly to change the setting, then press OK. ● The current VFP settings appear again. 6 Adjust the other parameters. Repeat steps 4 and 5 to adjust other parameters. To return to the normal screen Press DVD PICTURE. To activate your setting Press DVD PICTURE, then press w e repeatedly to select "USER 1" or "USER 2" that you have changed the parameters.