JVC HR-XVS44U Supplementary Material - Page 87
JPEG Playback DVD deck, RECORDING VCR deck
View all JVC HR-XVS44U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
EN 87 2. Not MP3/WMA files but JPEG files are ● The MP3&WMA/JPEG setting is set to played. "JPEG". 3. The MP3/WMA control display appears on the TV screen, but no operation can be performed. ● No MP3/WMA files or JPEG files are recorded to the disc, or the disc is an unplayable disc (such as CD-ROM). JPEG Playback (DVD deck) When both MP3/WMA files and JPEG files are recorded to a disc, set "MP3&WMA/ JPEG" to "MP3&WMA" to play MP3/WMA files. (੬ pg. 81) Replace the disc. (੬ pg. 9) SYMPTOM 1. A disc cannot be played. POSSIBLE CAUSE ● No JPEG files are recorded to the disc. ● JPEG files do not have the correct file extension in their file names. ● JPEG files are not recorded in a format compliant with ISO 9660 Level 1 or 2. 2. Not JPEG files but MP3/WMA files are ● The MP3&WMA/JPEG setting is set to played back. "MP3&WMA". CORRECTIVE ACTION Replace the disc. Add correct file extension (.jpg, .jpeg, .JPG, .JPEG or any uppercase and lowercase combination such as ".Jpg") to their file names. Replace the disc. (Record JPEG files using a compliant application.) When both MP3/WMA files and JPEG files are recorded to a disc, set "MP3&WMA/ JPEG" to "JPEG" to play JPEG files. (੬ pg. 81) RECORDING (VCR deck) SYMPTOM 1. Recording cannot be started. 2. TV broadcasts cannot be recorded. 3. Tape-to-tape editing is not possible. 4. Camcorder recording is not possible. 5. "⅜" and "$" on the front display panel won't stop blinking. POSSIBLE CAUSE CORRECTIVE ACTION ● There is no cassette loaded, or the Insert a cassette, or using adhesive tape, cassette loaded has had its record safety cover the hole where the tab was tab removed. removed. ● "F-1" or "L-1" has been selected as the Set to the desired channel. input mode. ● The source (another video recorder, camcorder) has not been properly connected. Confirm that the source is properly connected. ● All necessary power switches have not Confirm that all units' power switches are been turned on. turned on. ● The input mode is not correct. Set the input mode to "F-1" or "L-1". ● The camcorder has not been properly connected. Confirm that the camcorder is properly connected. ● The input mode is not correct. Set the input mode to "F-1" or "L-1". ● The end of the tape was reached during recording. The program may not have been recorded in its entirety. Next time make sure you have enough time on the tape to record the entire program.