JVC KD PDR80 Instructions - Page 25

Selecting a preset sound mode You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer). ENGLISH Preset value setting for each sound mode Preset value Sound mode Bass Mid (mid-range) Treble Freq. Level Q Freq. Level Q Freq. Level Q USER 60 Hz 00 Q1.25 1.0 kHz 00 Q1.25 10.0 kHz 00 - ROCK 100 Hz +03 Q1.0 1.0 kHz 00 Q1.25 10.0 kHz +02 - CLASSIC 80 Hz +01 Q1.25 1.0 kHz 00 Q1.25 10.0 kHz +03 - POPS 100 Hz +02 Q1.25 1.0 kHz +01 Q1.25 10.0 kHz +02 - HIP HOP 60 Hz +04 Q1.0 1.0 kHz -02 Q1.0 10.0 kHz +01 - JAZZ 80 Hz +03 Q1.25 1.0 kHz 00 Q1.25 10.0 kHz +03 - Freq.: Frequency Q: Q-slope Adjusting the sound You can adjust the sound characteristics to your preference. • When is shown on the display, you can move back to the previous screen by pressing number button 3 or 6. 1 2 • For "EQ" setting, see page 26. * Displayed only when "L/O Mode" is set to "Woofer" (see page 29). 3 Adjust the selected setting item. A Fad/Bal (Fader/Balance) 1 Press number button 1 ( ) to move to the "Fad/Bal" adjustment display. 2 Adjust the speaker output balance by pressing: 5 / ∞: between the front and rear speakers. [F6 to R6] 4 /¢ : between the left and right speakers. [L6 to R6] B Subwoofer 1 Press number button 1 ( ) to move to the "Subwoofer" adjustment display. 2 Use 4 /¢ to select a cutoff frequency to the subwoofer. • OFF: All signals are sent to the subwoofer. • 80Hz: Frequencies higher than 80 Hz are cut off. • 120Hz: Frequencies higher than 120 Hz are cut off. • 160Hz: Frequencies higher than 160 Hz are cut off. Continued on the next page SETTINGS 25