JVC KW-AV61 Instruction Manual - Page 40
Adjusting the crossover, frequency, Adjusting the sound precisely
View all JVC KW-AV61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
ENGLISH Adjusting the sound precisely 1 Perform steps 1 and 2 of "Selecting a preset sound mode," then... Adjusting the crossover frequency 1 On screen: 2 Select a band. 2 3 Adjust the sound. Reset Freq Q Bass SW Level Changes level of Low/Mid/ High to 0. Selects frequency. Adjusts the width of the frequency.*1 Activates/deactivates bass.*2 Adjusts subwoofer level. The adjustments are overwritten if the setting has been made ( page 39), and is activated. 3 Select the item to adjust, then make adjustments. Adjusts the crossover for front or rear speakers (high pass filter). Adjusts the crossover for subwoofer (low pass filter). • The adjustments are memorized until you adjust sound again. • To make adjustment for other bands, repeat steps 2 and 3. *1 Fixed for "High" band. *2 Only for "Low" band. Adjusts the crossover frequency. Selects the phase for the subwoofer.* Adjusts the subwoofer level. * Not selectable when is set to . 40