JVC KY-F550U Instruction Manual - Page 42

5. Setting Via the Menu Screen (continued) "PROCESS (2/2)" Screen Settings in bold are factory settings Item "COLOR MATRIX" "ADJUST.." "GAMMA" "LEVEL" "BLACK" "FLARE" "MASTER" Function/Variable Values For setting color matrix. "OFF" : Disabled. "STANDARD" : Sets to standard color matrix. "MANUAL" : Sets color matrix to the manual adjustment mode. This can be selected only when the "COLOR MATRIX" item is set to "MANUAL". Press the [SET] button to invoke the "MATRIX ADJUST" screen. ☞ Page 42 'MATRIX ADJUST Screen' For adjusting the gamma curve that determines the reproducibility of black color. "OFF" : Disables gamma curve adjustment. "MANUAL" : Amount of gamma curve adjustment can be altered using the "LEVEL" item. Gamma curve adjustment is enabled only when the "GAMMA" item is set to "MANUAL". Increase value : Enhances gradation of black. However, gradation of bright portions will deteriorate. Decrease value : Enhances gradation of bright portions. However, gradation of black will deteriorate. {Variable Values : -5 - 0 - +5} Note Displayed as when the "GAMMA" item is set to "OFF". For switching gain of the dark portions. Switch via the video signals to be shot. "NORMAL" : Standard mode "STRETCH" : Stretches only the darker portions of the signal, thus emphasizing the light and shade of the darker portions. "COMPRESS" : Compresses gain of the black portion to add contrast in the case when image shot is bright and with little contrast. For correcting the black level when light that enters the lens reflects irregularly and hence causing flare, where color appears on the black portion. "OFF" : Correction disabled. "ON" : Correction enabled. Note Selection of "MASTER", "FLARE (R)" and "FLARE (B)" items is disabled when the "FLARE" item is set to "OFF". (Displayed as Performs correction on the entire black level. Increase value : Increases black level. Decrease value : Reduces black level. {Variable Values : -10 - 0 - +10} 40