JVC KY-F550U Instruction Manual - Page 48
Others, Connecting the Remote Control Unit
View all JVC KY-F550U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
6. Others Connecting the Remote Control Unit Menu function of the camera can be set using the remote control unit (RM-LP55 AND RM-LP57). (Please refer to the instruction manual of the remote control unit for details on remote control operations. ) RM-LP55 3. Use the [FUNC2 §/∫] buttons to set the camera RGB, Y/C, SYNC OUT DV LENS VIDEO OUT RM-LP55 REMOTE CONTROL UNIT ON type setting no. to "3". 4. Pressing the [ENTER/SET] button returns to the OPERATE TRGGER POWER DC IN FUNC 1 FUNC 2 W.PAINT GAIN SHUTTER IRIS MANU OPERATE REMORT SEE INSTRUCTION MANUAL [MENU §/∫] MENU ENTER FUNC 1 FUNC 2 /SET FILE W.BAL GAIN SHUTTER FOCUS NEAR FAR SLOW FAST ZOOM OFF normal mode of use after "INITIALIZE" is dis- played. [FUNC2 §/∫] [ENTER/SET] Caution ● When setting the "SHUTTER" function to "SLOW", [FAR] set the "GAIN" function to other than "ALC" and "ALC+EEI". ● When the function settings of RM-LP55 are as be- Ⅵ When operating the menu function low, even if the [AW] button of this unit is pressed, of this unit from RM-LP55 ● Make sure that the Switch 4 located at the side of this unit is set to [OFF] (lower side). ● Set the "CAMERA TYPE" setting no. of RMLP55 to "3". "LOW LIGHT ERROR" will be displayed on the LCD screen and auto white will not be functional. • When the "SHUTTER" function is "SLOW". • When the "RANDOM TRIGGER" function is "ON". • When auto white shading is being activated Connection Connect cable of the remote control unit to the [REMOTE] terminal of this unit. through the camera operation. ● When the "RANDOM TRIGGER" function is set to "OFF", the camera operates in FREEZE mode. Notes Operation 1. Press the [ENTER/SET] and [FAR] buttons at the same time when turning the [OPERATE] switch to [ON]. Display on LCD screen will be as shown in the following diagram. AUTO IRIS LEVEL ON ● In the case when the menu function of this unit is identical to the remote control unit, the switch function of the local remote control will override that of this unit. ● When connected to RM-LP55, even if the "V. SCAN" under "SHUTTER" item is set to 1/60.0, the camera will operate based on 1/60.1. As such, the image level will change if the "STEP" mode under "SHUTTER" item is changed from NORMAL (1/60) to "V. SCAN". 2. Use the [MENU §/∫] buttons to display the "CAMERA TYPE" setting screen. Display on LCD screen will be as shown in the following diagram. CAMERA TYPE 1 46 Camera Type Setting No.