JVC KY-F550U Instruction Manual - Page 50

● Connecting the IEEE 1394 Cable, Connecting the analog output (D-SUB) Cable

Get JVC KY-F550U - 3-ccd Color Camera PDF manuals and user guides View all JVC KY-F550U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

6. Others (continued) Connecting the IEEE 1394 Cable Wind Once ● Attach the supplied clamp filter as shown in the diagram on the left to reduce unwanted electromagnetic emission. ● Attach the clamp filter as shown in the diagram on the left to this unit as near as possible. ● Set Switch 1 and Switch 4 located at the side of this unit to [ON] (upper side). To [DV] Terminal 1 23 4 ON OFF Switch 1 Switch 4 Caution Perform these when the unit is off. Connecting the analog output (D-SUB) Cable To [RGB, Y/C, SYNC OUT] Terminal ● Attach the supplied clamp filter as shown in the diagram on the left to reduce unwanted electromagnetic emission. ● Attach the clamp filter as shown in the diagram on the left to this unit as near as possible. ● Set the switches located at the side of this unit. • Setting Switch 2 Set this switch to [ON] (upper side) for Y/C output. Set this switch to [OFF] (lower side) for RGB output. • Setting Switch 3 Set this switch to [ON] (upper side) if sync signal is to be superimposed onto the Green (G) channel of the video signal. ☞ Page 10 '9 Function Setting Switch' 1 23 4 ON OFF Switch 2 Switch 3 Caution Perform these when the unit is off. 48

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
48
6.
Others (continued)
ON
OFF
1
234
●
Attach the supplied clamp filter as shown in the
diagram on the left to reduce unwanted electro-
magnetic emission.
●
Attach the clamp filter as shown in the diagram
on the left to this unit as near as possible.
●
Set Switch 1 and Switch 4 located at the side of
this unit to [ON] (upper side).
To [DV] Terminal
Connecting the IEEE 1394 Cable
Caution
Perform these when the unit is off.
Switch 1
Wind Once
●
Attach the supplied clamp filter as shown in the
diagram on the left to reduce unwanted electro-
magnetic emission.
●
Attach the clamp filter as shown in the diagram
on the left to this unit as near as possible.
●
Set the switches located at the side of this unit.
•
Setting Switch 2
Set this switch to [ON] (upper side) for Y/C
output.
Set this switch to [OFF] (lower side) for RGB
output.
•
Setting Switch 3
Set this switch to [ON] (upper side) if sync signal
is to be superimposed onto the Green (G)
channel of the video signal.
☞
Page 10 ‘
9
Function Setting Switch’
To [RGB, Y/C, SYNC
OUT] Terminal
Connecting the analog output (D-SUB) Cable
Caution
Perform these when the unit is off.
ON
OFF
1
234
Switch 3
Switch 2
Switch 4