Kenmore 7754 Use and Care Guide - Page 16
Kenmore 7754 - Elite 30 in. Gas Range Manual
View all Kenmore 7754 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Setting Oven Controls • • • Setting the Clock Changing between 12or24 hour display Silent Control Operation Setting the Clock pad is used to set the clock. The clock may be The CLOCK _"Q) set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the clock in the display will flash (See Fig. 1). INSTRUCTIONS To set the 1. 2. Press _. Press (See Fig. 3). clock Fig. 1 PRESS for 1:30): DISPLAY (example below "CLO"will appear in the display (See Fig. 2). ®_) Fig. 2 Fig. 3 pads to set the time of day to 1:30 Press A C_ART_, "CLO" will disappear and the clock will start (See Fig. 4). Changing 1. between 12 or 24 hour time of day display: 6 seconds untill "12h" or "24h" Fig. 4 Press and hold _"Q)for appears in the display. (_for 6 seconds 2. Press _cC_aX,_ to switch between the 12 and 24 hour time of day display. "12h" or "24h" will be displayed (See Figs. 5 or 6). to 3. 4. Press to accept the desired change or press _ o,G Fig. 5 reject the change. Reset the correct time as described in To set the clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 00:00 through 23:59 hours. Fig. 6 Setting Silent Control Operation and FLEX CLEAN (,,_l_a_ pads control the Silent Control operation feature. The Silent Control v The DELAY START ( _;_ operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps. INSTRUCTIONS To change 1. PRESS sound to silent control operation: DISPLAY control from normal To tell if your range is set for normal or silent operation press and hold _s_tY_ for 6 seconds. (See Fig. 7) _tY for 6 seconds Fig. 7 2. Press _ v to switch between normal sound operation and silent operation mode. The display will show either "SP" (See Fig. 8) or" - -" (See Figs. 2 or 3). Fig. 8 If "SP" appears (See Fig. 2), the control will operate with normal sounds and beeps. If" - -" appears (See Fig. 9), the control is set for silent operation mode. 3. Press _ change. 16 to accept the change or press Q to reject the @orQ Fig. 9