Kenmore 7754 Use and Care Guide - Page 35

Self-Cleaning • Setting Flex Clean or Delay Flex Clean iNSTRUCTiONS When the Self=Clean 1. 2. PRESS DISPLAY cycle is done: The time of day, "HOT", "DOOR LOCKED" and "CLEAN" icon will remain in the display (See Fig. 7). Once the oven has cooled down for approximately I HOUR, and the "DOOR LOCKED" icon is no longer displayed, the oven door can then be opened. Fig.7 Stopping or Interrupting a Self=Cleaning cycle: If it becomes necessary to stop or interrupt a Self-Cleaning cycle due to excessive smoke or fire in the oven: 2. Once the oven has cooled down for approximately I HOUR and the "DOOR LOCKED" icon is no longer displayed,the oven door can then be opened (See Fig. 8). Fig.8 IMPORTANT NOTES when using the Self-Clean feature: 1. The Self-Clean feature will not operate whenever a radiant surface remains ON (if equipped). 2. A Self-Clean cycle cannot be started if Oven Lockout feature is active. iii ...iii ... 3. If a Self-Cleaning=Cycle has started but not finished and a power failure occurs, the appliance may be thoroughly cleaned. After the door unlocks and power has been restored, set for another Self-Clean cycle. 4. If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12 hours in advance. To set for Delay Flex-Clean 12-24 hours in advance see the instructions to set the control for the 24 hour time of day display mode. 35