Kenmore 7754 Use and Care Guide - Page 5

important Safety instructions Grounding type wall receptacle Grounding (electric instructions only) ignition models Do not, under any circumstance, cut, remove, or bypass the grounding prong. Avoid fire hazard or electrical shock. Do not use an adapter plug, an extension cord, or remove grounding prong from electrical power cord. Failure to follow this warning can cause serious injury, fire or death. This appliance is equipped with a 3-prong grounding plug for your protection against shock hazard and should be plugged directly into a properly grounded receptacle. DO NOT cut or remove the grounding prong from this plug. For personal safety, the range must be properly grounded. For maximum safety, the power cord must be plugged into an electrical outlet that is correctly polarized and properly grounded. Power supply cord with 3=prong grounding plug If a 2-prong wall receptacle is the only available outlet, it is the personal responsibility of the consumer to have it replaced with a properly grounded prong wall receptacle installed by a qualified electrician. See the INSTALLATION INSTRUCTIONS installation and grounding instructions. 3- packaged with this range for complete important Safety Notice ...',i ... The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances known to the state to cause cancer, birth defects or other reproductive harm, and requires businesses to warn customers of potential exposure to such substances. Conversion to Liquefied Petroleum Gas (or L.P. Gas) Personal injury or death from electrical shock may occur if the range is not installed by a qualified installer or electrician. Any additions, changes or conversions required in order for this appliance to satisfactorily meet the application needs must be made by Sears Service. (Some models) Please Note: Models equipped with a double right front gas burner are not L.P. Convertible. (Some models) All other models are designed to allow for conversion to Liquefied Petroleum (L.P.) Gas. If L.P. conversion is needed and possible for your model, contact your local L.P, gas provider for assistance. The L.P. Conversion Kit will be provided with this range and is located on the left lower REAR (back side) panel of the range. Before installing the kit be sure to follow the L.P. Installation Instructions carefully.