Kenwood CMOS-310 User Manual - Page 14
Display View Switching CMOS-310 only
View all Kenwood CMOS-310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Display View Switching (CMOS-310 only) Display View Switching The CMOS-310 camera system can display 5 kinds of camera images. 1 With an image displayed on the monitor, press the view button of the switch unit. Each press switches the image display mode in the following order. Super Wide View Wide-angle image covering a horizontal angle of about 190°. PinP View The overhead view is displayed on the upper half of the screen while the wide view is displayed on the lower half. The overhead view in the upper half of the screen shows the area on the nearer side of the orange line shown in the wide view in the lower half. Wide View Camera image covering a horizontal angle of about 135°. Corner View The views seen from the two corners of vehicle are displayed on the left and right halves of the screen. Overhead View Image seen from the viewpoint straight up above the vehicle. When connecting the camera to a Kenwood navigation system etc, (Control unit) equipped with the camera control function, use the provided control unit connection cord. This allows the control unit to switch the display view as well on touch the control unit screen (page 7). 14 | CMOS-310/CMOS-210