Kenwood KDC-MP635 Instruction Manual - Page 13

Text Display Selection - Display Type C&D- Changing the text display. 1 Enter Text Display Selection mode Using the Control knob, select "DISP" > "TEXT". For the operation method, refer to (page 10). 2 Select the text display part Push the Control knob towards up or down. The cursor (‰) moves to the selected text display part. Select the text Turn the Control knob or push it towards left or right. See (page 14). Upper text display part: Information of condition column "4" is displayed. Middle text display part: Information of condition column "5" is displayed. Lower text display part: Information of condition column "6" is displayed. 3 Exit Text Display Selection mode Press the Control knob. ⁄ • When LX-AMP is connected, the item setup by the Display mode of LX-AMP is displayed. (KDC-X791) • When the music number exceeds 1000, only the last 3 digits of its number are displayed. (KDC-X791/MP735U) • Album name cannot be displayed in WMA file. (KDCMP635) • Music title, Artist name, and Album name cannot be displayed in WAV file. (KDC-X791/MP735U) • When playing music from iPod or music edited by "Music Editor", the folder name display may show something different such as playlist or artist name depending on the music selection procedure. (KDC-X791/MP735U) • Same information cannot be displayed in Upper text display part, Middle text display part and Lower text display part. However, the blank display is able to have multiple selections. • In the upper text display part, alternate information is displayed when display without information is selected. • In the middle text display part, the Kenwood logo is displayed if the contents of the information cannot be displayed. However, in the HD Radio source part, the display becomes blank. • In the lower text display part, no information is displayed when display without information is selected. English | 13