Kenwood KDC-MP635 Instruction Manual - Page 36
Supreme Setting, B.M.S. Bass Management System, B.M.S. Frequency Offset, Dual Zone System Setting - instruction manual
View all Kenwood KDC-MP635 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Menu system Other than Standby mode/ When the Dual Zone System is ON Dual Zone System Setting Setting the Front channel and Rear channel sound in the Dual Zone System. Display "Zone 2 : Rear" "Zone 2 : Front" Setting Sub source (Auxiliary input source) is to be rear channel. Sub source (Auxiliary input source) is to be front channel. In Audio file source Supreme Setting When AAC, MP3 or WMA files encoded at a low bit rate (less than 96kbps (fs= 44.1k, 48kHz)) are played, this function restores their high frequency region to approach the sound quality of equivalents of these files encoded at a high bit rate. Processing is optimized for the compression format used (AAC, MP3, or WMA), and adjustment is made for the bit rate used. Display "Supreme : ON" "Supreme : OFF" Setting Plays sound using the Supreme function. Plays the original sound stored in the audio file. ⁄ • The sound effect may be imperceptible depending on the relationship between the audio file format and setting. • This function is not available on iPod. Function of KDC-X791 Other than Standby mode B.M.S. (Bass Management System) Adjust the bass boost level of the external amplifier using the main unit. Display "AMP Bass : Flat" "AMP Bass : +6" "AMP Bass : +12" "AMP Bass : +18" Setting Bass boost level is flat. Bass boost level is low (+6dB). Bass boost level is mid (+12dB). Bass boost level is high (+18dB). ⁄ • Refer to the catalog or instruction manual for power amplifiers that can be controlled from this unit. • For amplifiers, there are the models you can set from Flat to +18 dB, and the models you can set from Flat to +12 dB. When an amplifier that can only be set to +12 is connected to the unit, "AMP Bass : +18" will not work correctly even if it is selected. Function of KDC-X791 Other than Standby mode B.M.S. Frequency Offset Setting the central frequency, boosted by B.M.S. Display "AMP FREQ : Normal" "AMP FREQ : Low" Setting Boost with the normal central frequency. Drop the normal central frequency 20%. 36 | English