Kenwood KDC-MP635 Instruction Manual - Page 48
HD Radio source, USB device source, The messages shown below display your, systems condition.
View all Kenwood KDC-MP635 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Troubleshooting Guide HD Radio source ? No sound can be heard, or the volume is low. ✔ The preset broadcast station is not transmitting in the mode that was set with (page 37). ☞ Please set to "Auto". ✔ In digital AM broadcasting, receive mode switches between stereo and monaural too often. ☞ Receiving condition is bad or unstable. Stereo is chosen when receiving condition is good, and it switches to monaural when the condition becomes bad. ✔ HD Radio tuner is connected to KCA-S220A or other units. ☞ Connect the HD Radio tuner directly to this unit. USB device source ? The USB device is not detected. ✔ The USB connector is disconnected. ☞ Connect the connector of the USB device properly. ? The USB device does not play its audio files. ✔ The USB connector is disconnected. ☞ Connect the connector of the USB device properly. The messages shown below display your systems condition. Eject: • No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. • No CD in the unit. No Disc: No disc has been loaded in the disc magazine. TOC Error: • No disc has been loaded in the disc magazine. • The CD is quite dirty. The CD is upsidedown. The CD is scratched a lot. Read Error: • The number of files or folders which are stored in the connected USB device is above the limitation. • The file system of the connected USB device is broken. ➪ Copy the files and folders for the USB device again referring to http://www. kenwood.com/usb/. If the error message is still displayed, initialize the USB device or use other USB devices. Error 05: The disc is unreadable. Blank Disc: Nothing has been recorded on the MD. No Track: No tracks are recorded on the MD, although it has a title. Error 15: Media was played that doesn't have data recorded that the unit can play. No Panel: The faceplate of the slave unit being connected to this unit has been removed. Error 77: The unit is malfunctioning for some reason. ➪ Press the reset button on the unit. If the "Error 77" code does not disappear, consult your nearest service center. Mecha Error: Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason. ➪ Check the disc magazine. And then press the reset button on the unit. If the "Mecha Error" code does not disappear, consult your nearest service center. 48 | English