Kenwood KDC-MP635 Instruction Manual - Page 17

⁄ • Like your vehicle's speedometer, G-Analyzer is no more than a measuring function. The HP or G value measured by this unit may not be completely accurate due to its simplified method of measurement. The G-Analyzer is only for reference and should not be used to confirm the horsepower specifications of your vehicle. • Measuring after starting the car lowers the accuracy. • The record will not be renewed if the measurement is discontinued. • The graph's scale adjusts automatically to the horsepower value. • The value of max power and record can be reset by (page 17). Display Type F G-Analyzer Reset Resets the value of G-Meter, G-Counter and GAnalyzer Horsepower Analysis. 1 Enter G-Analyzer Reset mode Using the Control knob, select "DISP" > "GMA" > "RESET". For the operation method, refer to (page 10). "G-RESET" is displayed. 2 Select the Reset item Turn the Control knob. Display "Meter Reset" "Power Reset" "Counter Reset" Setting Reset the value of G-Meter. Reset the value of G-Analyzer Horsepower Analysis. Reset the value of G-Counter. 3 Determine the item you want to reset Press the Control knob. 4 Reset the value Select "YES" using the Control knob. "Reset OK" is displayed. 5 Exit G-Analyzer Reset mode Press the [FNC] button. Display Type F G-Counter Level seting Calibrating G-Point. Setting the level according to the kinds of vehicles. 1 Enter G-Counter Level setting mode Using the Control knob, select "DISP" > "GMA" > "LEVEL". For the operation method, refer to (page 10). "G-COUNTER LEVEL" is displayed. 2 Select the G-Counter Level Turn the Control knob. Display "Level1" "Level2" "Level3" ... Setting Counter is easy to go up. Counter is hard to go up. 3 Exit G-Counter Level setting mode Press the Control knob. ⁄ • In the case of driving situations calling for few accelerations, set the G-Point up to "Level1". In the case of frequent accelerations, set it up to "Level3". English | 17