Kenwood KDC-MP635 Instruction Manual - Page 40
Firmware version display, Demonstration mode Setting - demo mode
View all Kenwood KDC-MP635 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Menu system Function of KDC-X791/KDC-MP735U In Standby mode Firmware version display Displaying the firmware version with the unit. Turn the Control knob. Select the "F/W Version : " display. In Standby mode Demonstration mode Setting Sets the demonstration mode. 1 Select the Demonstration mode Turn the Control knob. Select the "DEMO Mode" display. 2 Set the Demonstration mode Press the Control knob for at least 2 seconds. Each time you press the knob at least 2 seconds, the Demonstration mode alternates between the settings shown in the table below. Display Setting "DEMO Mode : ON" The Demonstration mode function is ON. "DEMO Mode : OFF" Exit Demonstration mode (Normal mode). 40 | English
40
|
English
Menu system
Function of KDC-X791/KDC-MP735U
In Standby mode
Firmware version display
Displaying the firmware version with the unit.
Turn the Control knob.
Select the "F/W Version : " display.
In Standby mode
Demonstration mode Setting
Sets the demonstration mode.
1
Select the Demonstration mode
Turn the Control knob.
Select the "DEMO Mode" display.
2
Set the Demonstration mode
Press the Control knob for at least 2 seconds.
Each time you press the knob at least 2 seconds,
the Demonstration mode alternates between the
settings shown in the table below.
Display
Setting
"DEMO Mode : ON"
The Demonstration mode function is ON.
"DEMO Mode : OFF"
Exit Demonstration mode (Normal mode).