Kodak 3600 User Manual - Page 76

Make sure the Picture Card, The Picture Card was

Page 76 highlights

Chapter 9 Camera Problem Cause Solution Picture is too light. The flash is not needed. Change to Auto flash (page 21). The subject is too close Move so there is at least 1.6 when the flash was used. ft (0.50 m) between the camera and the subject. The light sensor is covered. Hold the camera so your hands or other objects do not cover the light sensor. Stored pictures are The Picture Card was damaged. removed when the viewfinder light was blinking. Make sure the Picture Card access light is not blinking before removing the card. Pictures remaining Picture does not take up The camera is operating number does not sufficient space to normally. Continue taking decrease after decrease the picture pictures. taking a picture. remaining number. Picture is not clear. The lens is dirty. Clean the lens (page 82). Subject too close when Move so there is at least 1.6 taking picture. ft (0.5 m) between the camera and the subject. Subject or the camera Hold the camera steady moved while the picture while taking the picture. was taken. The subject is too far Move so there is no more away for the flash to be than 7.5 ft (2.3 m) between effective. the camera and the subject. 68

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106

68
Chapter 9
Picture is too light.
The flash is not needed.
Change to Auto flash
(
page 21
).
The subject is too close
when the flash was used.
Move so there is at least 1.6
ft (0.50 m) between the
camera and the subject.
The light sensor is
covered.
Hold the camera so your
hands or other objects do
not cover the light sensor.
Stored pictures are
damaged.
The Picture Card was
removed when the
viewfinder light was
blinking.
Make sure the Picture Card
access light is not blinking
before removing the card.
Pictures remaining
number does not
decrease after
taking a picture.
Picture does not take up
sufficient space to
decrease the picture
remaining number.
The camera is operating
normally. Continue taking
pictures.
Picture is not clear.
The lens is dirty.
Clean the lens (
page 82
).
Subject too close when
taking picture.
Move so there is at least 1.6
ft (0.5 m) between the
camera and the subject.
Subject or the camera
moved while the picture
was taken.
Hold the camera steady
while taking the picture.
The subject is too far
away for the flash to be
effective.
Move so there is no more
than 7.5 ft (2.3 m) between
the camera and the subject.
Camera
Problem
Cause
Solution