Kodak I1120 User Guide - Page 12
Connecting the power cord and USB cable, Attach the USB cable to the scanner USB port - scanner drivers
UPC - 041778456927
View all Kodak I1120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Connecting the power cord and USB cable When the drivers have been installed, connect the power supply, power cord and USB cable to the scanner. Refer to the illustration below for making proper connections. Make sure the power outlet is located within 1.52 metres (5 feet) of the scanner and is easily accessible. 1. Select the appropriate AC power cord for your region from the supply of power cords packed with your scanner. 2. Attach the power cord for your power type to the power supply. NOTE: Be sure that the power cord is securely attached to the power supply. 3. Plug the output power cord from the power supply into the power port on the scanner. 4. Plug the other end of the power cord into the wall outlet. 5. Attach the USB cable to the scanner USB port, located on the back of the scanner. 6. Attach the other end of the USB cable to the proper USB port on your PC. NOTE: If you installed a USB card, use one of those ports, or use your PC's USB port. See your PC manufacturer's documentation for the location of the USB port. A-61602 February 2009 2-5