Konica Minolta bizhub 181 bizhub 181 User Manual - Page 200
MACHINE SETTING, MACHINE SETTING parameters
View all Konica Minolta bizhub 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
Utility mode/Copy mode parameters 6 6.3 MACHINE SETTING From the "MACHINE SETTING" menu, the following machine settings can be changed. MACHINE SETTING parameters No. MACHINE SETTING Description 1 AUTO PANEL RE- This parameter can be used to specify the length of time until the SET auto panel reset operation is performed after copying or the oper- ation for the last key pressed is finished. When the auto panel reset operation is performed, the machine automatically returns to the default mode and the basic screen is displayed. The manufacturer's default setting is 1 minute. 2 ENERGY SAVE MODE This parameter can be used to specify the length of time that the machine is idle before it enters Power Save mode. The manufacturer's default setting is 15 minutes. 3 AUTO SHUT OFF This parameter can be used to specify the length of time that the machine is idle before it is turned off. The manufacturer's default setting is "OFF". 4 DENSITY (ADF) This parameter can be used to specify the image quality level when the optional document feeder is used. MODE1: Select this setting to lighten the copy density and reduce spots in the copy. MODE2: Select this setting to produce copies at the same density as that of the document. The manufacturer's default setting is "MODE1". 5 DENSITY (BOOK) This parameter can be used to specify the density level when a document placed on the original glass is copied. MODE1: Select this setting to produce copies at the same density as that of the document. MODE2: Select this setting to lighten the copy density and reduce spots in the copy. The manufacturer's default setting is "MODE1". 6 PRINT DENSITY This parameter can be used to select one of the five density levels for printing. The manufacturer's default setting is . 7 LCD CONTRAST This parameter can be used to adjust the contrast of the control panel display. The manufacturer's default setting is . 8 KEY SPEED SET- This parameter can be used to specify the length of time until re- TING peating input begins after a key is held down and the repeating in- terval. The manufacturer's default setting is "1.0sec" for "TIME TO START" and is "0.1sec" for "INTERVAL". 9 LANGUAGE The display language can be selected. The manufacturer's default setting is "ENGLISH". 10 SCAN THRESHOLD This parameter appears only when optional image controller IC206 or network interface card NC-503 is installed. This parameter can be used to specify the amount of memory that is available before the memory becomes full and scanning stops. For details, refer to the User's Guide for the corresponding option. Utility mode/Copy mode parameters Chapter 6 bizhub 181 6-5