Konica Minolta bizhub 181 bizhub 181 User Manual - Page 302

Troubleshooting Chapter 8 Troubleshooting 8 Symptom Possible Cause Remedy The edge of the copy is Is the document pad dirty? dirty. Clean the document pad with a soft cloth dampened with a mild detergent. (See page 9-8.) Was the selected paper size larger than the document? (when copying at full size) Select a paper size that is the same size as the document. (See page 4-12.) Otherwise, select the "AUTO" Zoom setting to enlarge the copy to the selected paper size. (See page 4-52.) Are the document size and paper orientation different? (when copying at full size) Select a paper size that is the same size as the document. Otherwise, select a paper orientation that is the same as that of the document. Was the copy reduced to a size smaller than the paper? (when copying at a reduced size specified manually) Select a zoom ratio that adjusts the document size to the selected paper size. (See page 4-53.) Otherwise, select the "AUTO" Zoom setting to reduce the copy to the selected paper size. (See page 4-52.) The image is not aligned properly on the paper. Is the document incorrectly positioned? Correctly position the document against the document scales. (See page 3-20.) If the document feeder is installed, correctly adjust the document guides for the size of the document. (See page 3-18.) Is the document incorrectly positioned in the document feeder? Lift open the document feeder, and correctly position the document against the document scales. (See page 3-20.) Are the adjustable document guides incorrectly positioned against the edges of the document? Slide the document guides against the edges of the document. Was curled paper loaded into the Flatten the paper before loading paper drawer? it into the paper drawer. bizhub 181 8-3