Konica Minolta bizhub 181 bizhub 181 User Manual - Page 54

Precaution 2 22 23 24 25 26 Precaution Chapter 2 27 28 30 29 No. Part name 22 [Fax] key 23 [Scan] key/indicator 24 [Copy] key/indicator 25 [123/ABC] key 26 [Reset] key 27 [Interrupt] key/indi- cator 28 [Clear/Stop] key 29 [Start] key/indicator Description Press to enter Fax mode. The indicator on the key lights up in green to indicate that the machine is in Fax mode. (Available only when fax kit FK-506 is installed) Press to enter Scan mode. The indicator lights up in green to indicate that the machine is in Scan mode. (Available only when network interface card NC-503 or image controller IC-206 are installed) Press to enter Copy mode. The indicator lights up in green to indicate that the machine is in Copy mode. Press to switch between number input mode and letter input mode. (Available only when fax kit FK-506, network interface card NC-503, or image controller IC-206 is installed.) • Press to clear all settings (except programmed settings) entered from the control panel. • Press to delete the job being specified. Press to enter Interrupt mode. The indicator lights up in green to indicate that the machine is in Interrupt mode. Press the key again to cancel Interrupt mode and return to the mode before Interrupt mode was entered. (See p. 4-62.) If this key is pressed while a computer document is being printed, printing stops so that the interrupting copy job can be performed. Press this key again to continue printing the computer document. • Press to clear the entered number and letters. • Press to stop a continuous copy operation. • Press to stop the print job from the computer. • Press to start a copy operation. • If this key is pressed while this machine is warming up, the next copy job is queued. (See p. 2-19.) • The key lights up in green to indicate that copy jobs can be queued, and the key lights up in orange to indicate that the machine is not ready to begin copy operations. bizhub 181 2-13