Konica Minolta bizhub C3350 bizhub C3850/C3350 Introduction User Guide - Page 26

How to use a Finisher

Get Konica Minolta bizhub C3350 PDF manuals and user guides View all Konica Minolta bizhub C3350 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

3.3 How to use a Finisher 3 3.3 How to use a Finisher If you use an optional Finisher, you can easily staple printed sheets together in the corner. This is convenient when you want to bind a set of printed sheets as a document such as a project book. To staple, load the corners of sheets into the Finisher. NOTICE When stapling consecutively, wait for 3 or more seconds after each stapling process finishes to prevent the internal temperature of the Finisher from increasing, then load the next set of sheets into the finisher. Tips - Up to 20 sheets (plain paper 90 g/m2) can be stapled together at one time. - If the Finisher fails to operate correctly, turn the power of the machine off and on, then reset the Fin- isher. - Paper with a borderless printed image cannot be detected by the sensor, and therefore, cannot be sta- pled. Do not load paper with a borderless printed image. dReference For details on the procedure to replace staples, refer to Chapter 2 "Checking and Replacing Consumables" in [User's Guide Maintenance/Troubleshooting]. For details on the procedure to clear staple jams, refer to Chapter 3 "Clearing a Paper or Staple Jam" in [User's Guide Maintenance/Troubleshooting]. [Introduction] 3-8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
[Introduction]
3-8
3.3
How to use a Finisher
3
3.3
How to use a Finisher
If you use an optional
Finisher
, you can easily staple printed sheets together in the corner. This is convenient
when you want to bind a set of printed sheets as a document such as a project book.
To staple, load the corners of sheets into the
Finisher
.
NOTICE
When stapling consecutively, wait for 3 or more seconds after each stapling process finishes to prevent the
internal temperature of the
Finisher
from increasing, then load the next set of sheets into the finisher.
Tips
-
Up to 20 sheets (plain paper 90 g/m
2
) can be stapled together at one time.
-
If the
Finisher
fails to operate correctly, turn the power of the machine off and on, then reset the
Fin-
isher
.
-
Paper with a borderless printed image cannot be detected by the sensor, and therefore, cannot be sta-
pled. Do not load paper with a borderless printed image.
d
Reference
For details on the procedure to replace staples, refer to Chapter 2 "Checking and Replacing Consumables"
in [User's Guide Maintenance/Troubleshooting].
For details on the procedure to clear staple jams, refer to Chapter 3 "Clearing a Paper or Staple Jam" in [Us-
er's Guide Maintenance/Troubleshooting].