Konica Minolta bizhub C360 bizhub C220/C280/C360 PKI Security Operations User - Page 25

Security Function Ver. 1.02 Jul. 2010

8. Service Mode functions

21

bizhub C360/C280/C220

for PKI Card System

Security Function

8.5.1

Initialize method

1.

Call the Service Mode to the screen.

See P.3

2.

Touch [System 1].

3.

Touch [Initialization].

4.

Select [Clear All Data] or the clear item in [Clear Individual Data] and press the Start

key.

5.

When “OK” is displayed, turn off the main power switch and turn it on again more than

10 seconds after.

NOTE

When the Clear All Data function has been executed, be sure to make the following

settings again.

•

Since the CE Password is reset to the default value, be sure to set once again a CE

Password that meets the requirements of the Password Rules.

•

Since the Administrator Password is reset to the default value, be sure to have the

administrator of the machine set once again an Administrator Password that

meets the requirements of the Password Rules.

•

Since the SNMP Password v3 is reset to the default value (MAC address), be sure

to have the administrator of the machine set once again a password that meets the

requirements of the Password Rules.

•

If you leave the site with the Service Mode setting screen being displayed, unau-

thorized changes could occur for any set values. When you finish the setting of

Service Mode, or if you have to leave the site by necessity when the Service Mode

has been set, be sure to press [Exit] to the main screen.

When the Clear Individual Data (Network Setting Data) function has been executed,

be sure to make the following settings again.

•

Since the SNMP Password v3 is reset to the default value (MAC address), be sure

to have the administrator of the machine set once again a password that meets the

requirements of the Password Rules.

A0EDS1E037DA

Section	Page
Security function	3
1. Overview	5
2. Compliance with the ISO15408 standard	5
3. Data to be protected	5
4. Precautions for operation control	5
5. Checking the firmware version number	7
5.1 Security authentication firmware version number	7
6. Accessing the Service Mode	7
6.1 Access method to the Service Mode	7
6.2 Access lock of Service Mode	9
6.2.1 Access lock release procedure	9
7. Enhancing the security function	10
7.1 Details of settings	10
7.2 Security enhancing procedure	10
7.2.1 Making and checking the service settings	10
7.2.2 Requests to the administrator	15
8. Service Mode functions	16
8.1 Firmware Version	16
8.1.1 Checking the firmware version number	16
8.2 CE Authentication function	17
8.2.1 Setting the CE Authentication function	17
8.3 Administrator Password function	18
8.3.1 Setting the administrator password	18
8.4 CE Password function	20
8.4.1 Setting the CE password	20
8.5 Initialization function	23
8.5.1 Initialize method	25
8.6 HDD Format	26
8.6.1 HDD format execution procedure	27
8.7 HDD installation setting	28
8.7.1 HDD installation setting procedure	28
8.8 Operation ban release time setting	29
8.8.1 Operation ban release time setting procedure	29
8.9 Administrator Unlocking function	30
8.9.1 Administrator Unlocking function procedure	30
9. Overwrite All Data function	31
9.1 Overwrite All Data procedure	31
9.2 Items to be cleared by Overwrite All Data	31
9.2.1 Items cleared by Overwrite All Data	31
10. Firmware rewriting	32
10.1 Outline	32
10.2 USB memory	32
10.2.1 Preparation	32
10.2.2 Procedure	32
10.2.3 Action when data transfer fails	35
11. Setup procedure for PKI card system	36
12. Installation of the loadable driver	36
13. FAX function	37
13.1 Installing/setting procedure of the FAX kit	37
13.1.1 Install procedure	37

Konica Minolta bizhub C360 bizhub C220/C280/C360 PKI Security Operations User - Page 25

When the Clear Individual Data Network Setting Data function has been executed - network settings

Page 25 highlights