Konica Minolta bizhub C360 bizhub C220/C280/C360 PKI Security Operations User - Page 35

Security Function Ver. 1.02 Jul. 2010

10. Firmware rewriting

31

bizhub C360/C280/C220

for PKI Card System

Security Function

13.

Call the Service Mode to the screen.

14.

Select [Firmware Version].

15.

Make sure if the version of firmware is updated.

10.2.3

Action when data transfer fails

•

If “NG” appears on the control panel, indicating that rewriting has been unsuccessful (in

which case the Start key lights up red), take the following steps.

1.

Perform the data rewriting procedure again.

2.

If the procedure is abnormally terminated, change the USB memory for a new one and

try another rewriting sequence.

3.

If the procedure is still abnormally terminated, change the board that has caused “NG”

and carry out data rewriting procedure.

A0EDS1E042DA

F/W to be updated

Appropriate board

Remark

MFP CONTROLLER

MFP board (MFPB)

SCANNER

MFP board (MFPB)

PRINTER

Printer control board (PRCB)

FAX BOARD CONTROLLER1

Fax board (Main)

Only when the FK-502 is mounted

FAX BOARD CONTROLLER2

Fax board (Sub)

Only when the FK-502 is mounted

ADF (DF-M)

DF control board (DFCB)

FINISHER

FNS control board (FSCB)

Only when the FS-527/529 is

mounted

RU

Transfer control board (TRCB)

SD

SD drive board (SDDB)

Only when the SD-509 is mounted

DSC1

DSC board

Only when the SC-507 is mounted

DSC2

Not used

Section	Page
Security function	3
1. Overview	5
2. Compliance with the ISO15408 standard	5
3. Data to be protected	5
4. Precautions for operation control	5
5. Checking the firmware version number	7
5.1 Security authentication firmware version number	7
6. Accessing the Service Mode	7
6.1 Access method to the Service Mode	7
6.2 Access lock of Service Mode	9
6.2.1 Access lock release procedure	9
7. Enhancing the security function	10
7.1 Details of settings	10
7.2 Security enhancing procedure	10
7.2.1 Making and checking the service settings	10
7.2.2 Requests to the administrator	15
8. Service Mode functions	16
8.1 Firmware Version	16
8.1.1 Checking the firmware version number	16
8.2 CE Authentication function	17
8.2.1 Setting the CE Authentication function	17
8.3 Administrator Password function	18
8.3.1 Setting the administrator password	18
8.4 CE Password function	20
8.4.1 Setting the CE password	20
8.5 Initialization function	23
8.5.1 Initialize method	25
8.6 HDD Format	26
8.6.1 HDD format execution procedure	27
8.7 HDD installation setting	28
8.7.1 HDD installation setting procedure	28
8.8 Operation ban release time setting	29
8.8.1 Operation ban release time setting procedure	29
8.9 Administrator Unlocking function	30
8.9.1 Administrator Unlocking function procedure	30
9. Overwrite All Data function	31
9.1 Overwrite All Data procedure	31
9.2 Items to be cleared by Overwrite All Data	31
9.2.1 Items cleared by Overwrite All Data	31
10. Firmware rewriting	32
10.1 Outline	32
10.2 USB memory	32
10.2.1 Preparation	32
10.2.2 Procedure	32
10.2.3 Action when data transfer fails	35
11. Setup procedure for PKI card system	36
12. Installation of the loadable driver	36
13. FAX function	37
13.1 Installing/setting procedure of the FAX kit	37
13.1.1 Install procedure	37

Konica Minolta bizhub C360 bizhub C220/C280/C360 PKI Security Operations User - Page 35

Action when data transfer fails

Page 35 highlights