Konica Minolta bizhub C3850FS bizhub C3850FS/C3850/C3350 Quick Start Guide - Page 62
Host Name]
View all Konica Minolta bizhub C3850FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Basic Usage Chapter 5 5.6 Registering a destination 5 Settings [Host Name] [File Path] [User ID] [Password] [Reference] Description Enter the destination computer name (host name) or the IP address (using up to 253 bytes). • Example of computer name (host name) entry: "HOME-PC" • Example of IP address (IPv4) entry: "192.168.1.1" • Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16" Enter the shared folder name of the computer specified in [Host Name] (using up to 255 bytes). • Entry example: "scan" When specifying a folder in the shared folder, insert a symbol, "\", between folder names. • Entry example: "scan\document" Enter the name of a user who has privileges to access the folder specified in [File Path] (using up to 255 bytes). • For workgroup user, only type in the user name. Entry example: "User01" • For domain user, type in user-name@domain-name. Entry example: "Us- [email protected]" Enter the password (using up to 127 bytes). Detect the target computer on the network, then select the shared folder. Information of the selected folder is registered. [FTP] Settings [No.] [Name] [Favorite] [Index] [Connection] [Host Name] [File Path] [User ID] [Password] [Detail Setting] Description Destination registration number. The smallest available number that is not used is automatically assigned. Enter the destination name (using up to 72 characters). Select this option to register a frequently used destination. The registered destination is displayed in [Favorite], enabling you to easily specify a destination. Select a corresponding character so that the destination can be index searched by name. Register information of the destination FTP server. Enter the host name or IP address of the destination FTP server (using up to 253 bytes). • Example of host name entry: "host.example.com" • Example of IP address (IPv4) entry: "192.168.1.1" • Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16" Enter the name of the storage folder in the FTP server specified in [Host Name] (using up to 127 bytes). • Entry example: "scan" When specifying a folder in the FTP folder, insert a symbol, "/", between the folder names. • Entry example: "scan/document" When the file path is not specified, only enter the "/". • Entry example: "/" If authentication is required in the destination FTP server, enter the available user name to log in (using up to 63 bytes). Enter the password (using up to 63 bytes). Configure settings to establish communications with the FTP server. • [Port No.]: If necessary, change the port number. Normally, you can use the original port number. [21] is specified by default. • [Pasv]: If the PASV mode is used in your environment, select [ON]. [ON] is specified by default. • [Proxy]: If a proxy server is used in your environment, select [ON]. [OFF] is specified by default. [Quick Start Guide] 5-23