Konica Minolta bizhub PRESS 1250 bizhub PRESS 1052/1250/1250P Additional Infor - Page 15
Press [Tray Setting] on the Machine Screen to display the Tray Setting Screen.
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
2.1 Operating the Machine with the Feeder 2 1 Load the Feeder with paper of A3 w/11 e 17 w. For details, refer to the Feeder's documentation. 2 Press [Tray Setting] on the Machine Screen to display the Tray Setting Screen. 3 Select [Feeder] and specify the paper size, paper type, and weight. Select A3 w/11 e 17 w for the paper size. 4 Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen. 5 Press [01 Machine Adjustment], [01 Magnification Adjustment], and [02 Printer FD-Mag. Adj. (Side 2)] in sequence. The Printer FD-Mag. Adjustment (Side 2) Screen will be displayed. 6 Select [Feeder]. 7 Press [Print Mode]. 8 Confirm that [Feeder] is selected on the Print Mode Screen. 9 Press Start on the control panel. A sample pattern will be output. 10 Measure the resultant magnification in the paper feed direction. Allowance: +/- 0.5% (full size) Within 205.7 +/- 1 mm 11 Press [Close] to restore the Printer FD-Mag. Adjustment (Side 2) Screen. 12 If adjustment is required, use the touch panel keypad or control panel keypad to enter the setting data. % Adjustable range: -10 (short) to 0 (long) (1 step = 0.05%) % Use [+-] to specify the value to be positive or negative. 13 Press [Set] to change the setting with the current value. 14 Repeat the steps from 7 to 13 until the desired result is obtained. 15 Press [Return] to restore the Magnification Adjustment Menu Screen. bizhub PRESS 1250/1250P/1052 2-9