Konica Minolta bizhub PRESS 1250 bizhub PRESS 1052/1250/1250P Additional Infor - Page 18
Timing Adjustment] - [02 Printer Restart Timing Side 2]
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
2 Operating the Machine with the Feeder 2.1 11 Press [Close] to restore the Printer Restart Timing Adjustment (Side 1) Screen. 12 If adjustment is required, use the touch panel keypad or control panel keypad to enter the setting data. % Adjustable range: -30 (short) to 30 (long) (1 step = 0.1 mm) % Use [+-] to specify the value to be positive or negative. 13 Press [Set] to change the setting with the current value. 14 Repeat the steps from 7 to 13 until the desired result is obtained. 15 Press [Return] to restore the Timing Adjustment Menu Screen. [02 Timing Adjustment] - [02 Printer Restart Timing (Side 2)] Make this adjustment if output includes image loss or blank space on lead edge on back side. The following describes how to adjust the Feeder tray. 1 Load the Feeder with paper of A3 w/11 e 17 w. For details, refer to the Feeder's documentation. 2 Press [Tray Setting] on the Machine Screen to display the Tray Setting Screen. 3 Select [Feeder] and specify the paper size, paper type, and weight. Select A3 w/11 e 17 w for the paper size. 4 Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen. 5 Press [01 Machine Adjustment], [02 Timing Adjustment], and [02 Printer Restart Timing (Side 2)] in se- quence. The Printer Restart Timing Adjustment (Side 2) Screen will be displayed. 6 Select [Feeder Offset]. 7 Press [Print Mode]. 8 Confirm that [Feeder] is selected on the Print Mode Screen. 2-12 bizhub PRESS 1250/1250P/1052