Konica Minolta bizhub PRESS 1250 bizhub PRESS 1052/1250/1250P Additional Infor - Page 28
Operating the Machine with the External Finisher, keypad, control panel, Large Capacity Stacker LS-
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
2 Operating the Machine with the External Finisher 2.2 11 Select [Wait], and then press [Print]. 12 Enter the print quantity with the keypad, then press [OK]. 13 On a confirmation dialog, press [Yes] to continue the recalling operation, or press [No] to finish. When you pressed [Yes], repeat step 9 and following operations. 14 On the Mode Check Screen of the main body's control panel, change the output settings (External Fin- isher (External FNS): ON, Output Tray: secondary (sub) tray of Large Capacity Stacker LS-505 or Large Capacity Stacker LS-506) and start printing samples. Press [Proof Copy] to output a whole set or press [Proof Print(1st Sheet)] to output only the first sheet. 2-22 bizhub PRESS 1250/1250P/1052
Operating the Machine with the External Finisher
2
2-22
bizhub PRESS 1250/1250P/1052
2.2
11
Select [Wait], and then press [Print].
12
Enter the print quantity with the
keypad
, then press [OK].
13
On a confirmation dialog, press [Yes] to continue the recalling operation, or press [No] to finish.
When you pressed [Yes], repeat step 9 and following operations.
14
On the Mode Check Screen of the main body's
control panel
, change the output settings (External Fin-
isher (External FNS): ON, Output Tray: secondary (sub) tray of
Large Capacity Stacker LS-505
or
Large Capacity Stacker LS-506
) and start printing samples.
Press [Proof Copy] to output a whole set or press [Proof Print(1st Sheet)] to output only the first sheet.