Konica Minolta bizhub PRESS 1250 bizhub PRESS 1052/1250/1250P Additional Infor - Page 19
Auto Tray Selection Setting
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
2.1 Operating the Machine with the Feeder 2 9 Press Start on the control panel. A sample pattern will be output. 10 Measure the resultant restart timing. Allowance: 20 +/- 0.5 mm (metric A/B) Allowance: 25.4 (1 inch) +/- 0.5 mm (inch series) 11 Press [Close] to restore the Printer Restart Timing Adjustment (Side 2) Screen. 12 If adjustment is required, use the touch panel keypad or control panel keypad to enter the setting data. % Adjustable range: -30 (short) to 30 (long) (1 step = 0.1 mm) % Use [+-] to specify the value to be positive or negative. 13 Press [Set] to change the setting with the current value. 14 Repeat the steps from 7 to 13 until the desired result is obtained. 15 Press [Return] to restore the Timing Adjustment Menu Screen. 2.1.6 Auto Tray Selection Setting When [Feeder ]is selected under [ATS/APS Switch] on the screen displayed by pressing [02 Function Setting] [01 Paper Tray Setting] - [01 Auto Tray Selection Setting] on the Utility Menu Screen, the Auto Tray Switch (ATS) function supplies paper from the Feeder if the main body tray or Paper Feeder Unit PF-703 becomes empty. On the other hand, if the Feeder is empty, the Auto Tray Switch (ATS) function does not supply paper from the main body tray or Paper Feeder Unit PF-703. bizhub PRESS 1250/1250P/1052 2-13