Konica Minolta bizhub PRESS 1250 IC-309m User Guide - Page 104

96 Chapter 7-Production workflows Parameter Option Default font Default font size Font substitution Description The selected font is used as the default font for the job, unless the IPDS stream already contains the fonts. Enables you to set the default font size for the default font. Provides the following options: ● Relaxed-The IPDS host reports few exceptions ● Strict-The IPDS host reports when a font combination that is requested by the IC-309m print controller is invalid. IPDS trays mapping IPDS trays mapping Provides the following options: ● Input tray ID ● Output tray ID Resource capture Resource capture Provides the following options: ● Capture fonts ● Capture data objects Layout Cut sheet emulation Provides the following options: ● Use cut sheet emulation, provides the following options: ○ Auto (According to host)-Settings are automatically taken from the IPDS host. ○ On-The cut sheet option is always turned on regardless of the settings on the IPDS host. ○ Off-The cut sheet emulation is turned off regardless of the settings on the IPDS host. ● Emulation method-Determines the direction and rotation of each sheet. Note: This is applicable whether you have selected cut sheet emulation on the IC-309m print controller or if the IPDS host initiates the cut sheet emulation. ● Partition offset X/Y-Determines the partition offset on each axis, X and Y. Banner page handling Rotate 180 Enables you to specify that the job contains a banner page. If the job is defined to print with a banner page (first information sheet) then the banner page is printed on a separate sheet. The banner page does not affect the page order of the job. Enables you to specify the rotation of the image on the printed sheet. You can apply 180 degrees rotation independently to both the front and back sides.